Can-Am Commander Terra 25 Winch By Superwinch
A winch is only as good as the gears inside. That's why Superwinch uses the widest gears; wide gears distribute the load evenly, provide better engagement and longer life. Further, the Superwinch Terra uses steel cut gears on 2nd and 3rd stage to insure long life. You can see the Superwinch gearset on the left is far more robust than the competitors on the right.
Superwinch uses the biggest, heaviest motors allowed by law. Superwinch engineers spec'd thick copper winders to deliver the most efficient power yet provide more surface area for rapid cooling. Sealed cartridge bearings on either end of the motor keep everything moving and spinning with ease. These are motors built to last. You can see from this image, Superwinch Terra motors are far more impressive.
READY FOR SYNTHETIC
Can-Am Commander Terra 25 Winch by Superwinch
Enhance your Can-Am Commander with one the toughest winch systems in the world specifically made for your UTV. The 3- stage planetary gear train is all metal for increased strength. The 50’ 3/16” diameter steel wire rope is durable enough to take the strain of your heaviest loads. Pull and turn free spooling clutch control coupled with automatic load braking system, keeps you in control of your winching and stopping abilities 100% of the time. Never drop a load or break a line again.
Need a little more convincing? These heavy-duty winches are the strongest, toughest and most robust pulling system for your Commander. Push your winch to its max capacity. Detailed instructions make mounting this winch on your Commander a breeze. Resilient enough to handle the heaviest loads, these winches are designed for extreme durability, so you can keep pulling, hauling, and winching for years to come. Maintain unbeatable control of your load. Now you can have a winch that works as hard as you do.
|Rated Line Pull
||2,500 lbs (1,134 kgs)
||Sealed 1.3 HP Permanent Magnet
||Sealed and Circuit Breaker Protected
||Free-Spooling, Ergonomic Control
||Automatic 100% Load Holding
||Wire 3/16" x 50' (4.8mm x 15.2m)
||Heavy-Duty, Clevis Pinned Latch
||Heavy-Duty 4-Way Roller
||10' Sealed Hand-Held
||13.2” L x 4.5” D x 4.8” H (335mm L x 114mm D x 122mm)
|Mounting Bolt Pattern
||3.0" x 4.87" (76mm x 124mm)
||18.0 lbs (8.16 kg)
||29.5 lbs (13.4 kgs)
||0 22705 00342 1
|Line Pull: 0 lbs
||25 Amps Motor Draw / 25.0 FPM (7.6 MPM) Line Speed
|Line Pull: 2,500 lbs
||162 Amps Motor Draw / 9.5 FPM (2.9 MPM) Line Speed